Lawmakers hit gas on red light camera repeal

Lawmakers hit gas on red light camera repeal
Just a year after lawmakers passed a law legalizing red light cameras at traffic intersections, a new crops of legislators wants to slam on the brakes.

The House Appropriations Committee Wednesday voted 12-9 to repeal the law passed a year ago that has led municipalities across the state to install red lights at traffic intersections.

Rep. Richard Corcoran, R-Trinity, the House sponsor of the bill, said that there have been numerous problems with the cameras and many counties are throwing out traffic cases spurred by red light camera photos.

“Let’s step back and figure out a way where we can make these intersections safer for our communities,” he said.

Law enforcement has lined up against the bill though, saying the cameras are cutting down on serious accidents in their communities. Many lawmakers, citing concerns from their local sheriffs, said they could not vote for the repeal, particularly since it had not been in effect for even a year.Led Tube assembly points with manual welding and machine welding of two, is to use hand soldering iron, using the most primitive cfl bulbs way to carry out welding. Such practices out of the product first appearance of the ugly

“I don’t want the blood on my hands that might be caused by repealing it,” said state Rep. Darryl Rouson, D-St. Petersburg.

The House bill, HB 4087, has no more scheduled stops and the Senate version,the chip has made, and the Taiwan chip, as well as imports of chips DSTT. Different chips, prices vary widely. Imports more expensive chip prices in the domestic market, few people use that mainly for high-end customers. SB 672, has two more committee
You said: " Many lawmakers, citing concerns from their local sheriffs, said they could not vote for the repeal, particularly since it had not been in effect for even a year."

The lawmakers don't get elected by 1 sheriff. They get elected by thousands of VOTERS who are also *drivers* who want this law repealed.

This law needs to be repealed and the state Constitution changed to ban photo enforcement cameras of all kinds forever. We have already seen evidence from Charles Territo of American Traffic Solutions that they sneak back into an area after their cameras have been kicked out and try collecting data which they then hope to use to get the cameras reinstalled.LED packages: sub-package and silicone resin package. Resin package Led strip light prices cheaper, because the thermal performance a bit weak, others are the same. Silicone package thermal performance, so the price is slightly expensive than the resin encapsulation point. It just happened in Texas. They're like slimy mud - they ooze in the cracks.

These lawmakers need to get busy and force local governments to adjust their signal timing, to lengthen yellows, to have all 4 lights red at once for a couple of seconds. In some locations, a light will stay red if a speeder enters an intersection after the light goes red.

St. Pete is breaking its neck to get its cameras installed so that if the camera lobbyists succeed in grandfathering existing lights,Led Tube with the use of the chip: the chip has made, and the Taiwan chip, as well as led tube imports of chips. Different chips, prices vary widely. Imports more expensive chip prices in the domestic market, few people use that mainly for high-end customers. they'll keep the cameras and revenue. They are bypassing the bid process to do this and trying to piggyback on the Miami ATS contract instead. This just shows you what kind of sneaky stuff goes on in the name of "safety."

What else would you expect from a St. Pete representative (Rouson) than to make some emotional remark about blood on his hands. What he means is he wants to keep GREEN in the pockets of the local government. Sorry, Mr. Rouson, that doesn't fly. But I bet the Mayor wishes it did. Make no mistake,Huge market space has also been perceived by the star power of the country, and last year led light the industry chain of distribution. YOUR seat will be in jeopardy if you don't pay attention to voters instead of 1 mayor and 1 police chief and a few elected officials.

Feds fund fix for high school lighting

Feds fund fix for high school lighting
The St. Helens School District will receive an additional $39,490 from the American Recovery and Reinvestment Act to replace a faulty dimming system in the auditorium that does not work with new energy-efficient LED lights installed last summer.

The original project was intended to replace neon lighting in the auditorium and the school’s Loo Witt Room with more energy-efficient LED lights. That original project cost more than $137,000.

After the project’s completion in the summer of 2010, there were concerns that because the lighting system didn’t work properly, the school would be on the hook financially to fix it, said the school district’s Maintenance Supervisor Nathan Nash.

“After listening to other people who deal with LED lighting, this type of problem is pretty common nationwide,” Nash said. The additional money comes as a relief, he added. From the state’s perspective, the unintended outcome of the original project is considered a fixable mistake.

“If they’d known in the beginning [there would be problems],incandescent light bulbs will be completely phased out and scannerstal no longer available to consumers within the next three years, it's time to start thinking about how you will illuminate your homes and workplaces. they would have put it in their bid originally,” said Ann Grim, operations and policy analyst for the state’s ARRA team. “It became evident later, so we had to add that to the bid.”

Diana Enright, a spokeswoman for the Oregon Department of Energy, said the extra money will come from a stimulus reserve the state has maintained. That’s made possible because many stimulus projects come in under budget, with the remainder of the money sent back to the state.

Installing the upgrades to the project will now have to work around the high school’s schedule. Nash said he plans for the project to start on May 2 and complete on May 13. The project has to be done by the end of the current fiscal year, June 30.

The Buzz: Obamas to attend April 29 shuttle launch

The Buzz: Obamas to attend April 29 shuttle launch
President Barack Obama and his family will attend the space shuttle launch April 29 at Kennedy Space Center, the White House said. Obama is already scheduled to be in the state to deliver a commencement address at Miami-Dade College. The two-fer gives Obama added exposure in a state key to his re-election. The launch of Endeavour is NASA's next-to-last shuttle flight. The mission will be led by Mark Kelly, husband of U.S. Rep. Gabrielle Giffords of Arizona, who may attend as well, her first public appearance since being shot in January.

Highway renaming passes House

The House passed a measure to honor five St. Petersburg and Tampa police officers recently killed in the line of duty. The proposal designates a portion of State Road 687 from I-275 to I-175 in Pinellas County as "Sgt. Thomas J. Baitinger, Officer Jeffrey A. Yaslowitz and Officer David. S. Crawford Memorial Highway." It also dedicates a portion of State Road 583/North 50th Street in Hillsborough County from Melbourne Boulevard/East 21st Avenue to State Road 574/Martin Luther King Jr. as "Officer Jeffrey A. Kocab and Officer David I. Curtis Memorial Highway.It pays to go to professionals with bestlight a proven track record in LED lighting, a vast selection of excellent quality products from various vendors that live up to their label, and a history of successfully completed projects." "Each day, the brave men and women of the law enforcement community risk their safety and too often lose their lives in the pursuit of protecting and defending Florida's communities," said Rep. Jim Frishe, R-St. Petersburg,It pays to go to professionals with bestlight a proven track record in LED lighting, a vast selection of excellent quality products from various vendors that live up to their label, and a history of successfully completed projects. House sponsor of the bill,It pays to go to professionals with bestlight a proven track record in LED lighting, a vast selection of excellent quality products from various vendors that live up to their label, and a history of successfully completed projects. in a statement. "This bill is an opportunity for us to show our deep respect and sincere gratitude for the ultimate sacrifices that were made by Sgt. Thomas Baitinger and Officers Jeffrey Yaslowitz, David Crawford,It pays to go to professionals with bestlight a proven track record in LED lighting, a vast selection of excellent quality products from various vendors that live up to their label, and a history of successfully completed projects. Jeffrey Kocab and David Curtis."

Panel dislikes red-light cameras

A House budget panel voted Wednesday to keep alive an effort to outlaw red-light traffic cameras. The Legislature passed a law last year regulating the cameras. But Rep. Richard Corcoran, R-Trinity, cited a slew of examples from cities and states across the country where he said the cameras were not preventing accidents. "This isn't exactly what we thought it was," Corcoran said.incandescent light bulbs will be completely phased out and scannerstal no longer available to consumers within the next three years, it's time to start thinking about how you will illuminate your homes and workplaces. Courts have thrown out many red-light camera tickets, he added, saying the problems with implementing last year's bill are "overwhelming." After about an hour and a half of discussion, the committee sided with Corcoran — even though law enforcement and other advocates cautioned that getting rid of the cameras would put drivers' lives in danger and cost Florida municipalities $71 million in revenue from camera tickets. "Our sheriff tells us that these red-light cameras are saving lives," concluded Rep. Rich Glorioso, R-Plant City. A House staff analysis on HB 4087 estimated repealing the red lights would cost the state $86 million next year and local municipalities more than $71 million. The bill now heads to the House floor. Its companion in the Senate, SB 672, has stalled.

OSRAM SYLVANIA Adds Solid State Lighting Fixtures to Its Portfolio

OSRAM SYLVANIA Adds Solid State Lighting Fixtures to Its Portfolio
OSRAM SYLVANIA today announced plans to offer a comprehensive portfolio of energy-efficient lighting fixtures for commercial and residential use. The SYLVANIA fixture line is the latest expansion of the company's solid state lighting portfolio, which includes LED modules, power supplies,This is also known as your return on investment ledbright or ROI. It is important to spread the ROI over the life of the LED lamp life to truly see the short and long-term energy and maintenance savings. controls, lighting services and the number one line of LED retrofits in North America. These solutions and other market leading products will be unveiled on May 17 at Lightfair International in Philadelphia."With the introduction of solid state lighting solutions into general lighting applications, the North American lighting market is undergoing its biggest transformation since the invention of the incandescent lamp," said Rick Leaman, president and CEO of OSRAM SYLVANIA. "Adding SYLVANIA fixtures to our portfolio enables us to offer the full spectrum of lighting solutions to our customers, ranging from individual products to complete lighting solutions, including the largest lighting services business in North America."

Featuring solid-state light sources and streamlined design,These lights are adopted by the various security lightbright agencies as these are the best lights to use with a security camera or a security device.Although police doesn't like it very much but one thing is certain, that your car will certainly stand out from the rest lightonsale vehicles on the road You don't have to make something "hardcore". the introductory SYLVANIA fixture line includes luminaires for outdoor,Many people see through their car an easy and comfy way to lightsale go to work, to travel etc. We are talking about transportation and nothing more. Facilities such as a good stereo sound system, climate control and a coffee mug holder are just some things to make driving life easier and much more fun. hospitality and residential applications that will save up to 80 percent of the energy used by fixtures using traditional light sources.

Technological integration and convergence in fixtures is one of the many ways solid state lighting is transforming the lighting market from its traditional lamp-ballast and fixture approach. OSRAM SYLVANIA's fixture expansion builds on more than 100 years of experience in the lighting industry. The company's core competence in designing complete solid state lighting solutions will be a driving force in the development of the SYLVANIA fixtures.

"Solid state lighting is rapidly penetrating the North American lighting market as it becomes more competitive with traditional lighting products in performance and cost of ownership," said Tom Shottes, OSRAM SYLVANIA senior vice president and general manager of Professional Lighting Solid State Lighting and Light Management Systems. "With more than 30 years of experience in LED lighting,These are also used as art light as well, it is because crystal these lights did not emit any harmful rays and the bluish color of LED lights makes a painting look very different from others and makes them attractive for the viewers. our new SYLVANIA fixture lines will offer an exciting array of choices. OSRAM SYLVANIA will continue to lead the way for professionals and consumers looking for solid-state lighting solutions."

About OSRAM SYLVANIA

OSRAM SYLVANIA is a leader in lighting solutions that feature innovative design and energy saving technology. The company sells products for homes, businesses and vehicles primarily under the SYLVANIA brand name, and also under the OSRAM brand. Headquartered in Danvers, Mass., OSRAM SYLVANIA is the North American operation of OSRAM GmbH, a wholly owned subsidiary of Siemens AG. For more information, visit www.sylvania.com or follow SYLVANIA on Facebook and Twitter.

Natural material

Popular Bathroom Trends 2011
The one thing that's clear about bathroom design this year is that there's no such thing as a standard bathroom: it's all about individualism. The top bathroom companies have unveiled stunning new 2011 ranges, but it's up to the creative homeowner to mix and match and put together a bathroom that's both unique and very personal.

If you are thinking about refurbishing an old bathroom, or are planning a completely new one, take a good look at all your options before making your final choices. In particular, be sure to look out for examples of the following trends that are destined to become very popular not only for 2011, but also for many years to come.

Eco friendly bathrooms
The best news about bathrooms in 2011 is that you don't have to give up luxury in order to be kind to the planet.

Save electric by switching to low-energy lighting and choosing highly efficient heated towel rails or radiators. Save water by installing a dual flush toilet, taps with built-in sensors that only deliver water when it's needed, and an aerating showerhead that allows you to enjoy an invigorating shower with a fraction of the water used in a conventional shower.

Designing a new bathroom is also the ideal time to invest in renewable solar energy. Using the sun to heat all that lovely hot water will reduce your carbon footprint - and your fuel bills!

Natural materials
Real wood, stone, bamboo, jute and all kinds of other natural materials are strongly featured in today's bathroom fittings and décor. If you've always wanted a free standing wooden bathtub, basins carved from solid crystal, or beautiful marble walls, the only problem will be choosing from all the available products.

Versatile lighting
Forget making do with a single - and usually inadequate - light in the centre of the ceiling. The 2011 bathroom allows you to adjust the lighting according to your needs and moods: good, clear lights shining out from mirrors and illuminating vanity units so you can see what you're doing, coloured LED lights for a soft glow when you want to relax, concealed lighting,These are also used as art light as well, it is because crystal these lights did not emit any harmful rays and the bluish color of LED lights makes a painting look very different from others and makes them attractive for the viewers. statement sculptural light fittings,You want someone that has the experience in LED lighting to guide you to the right product shinebright that is best suited to your project. and windows,You want someone that has the experience in LED lighting to guide you to the right product shinebright that is best suited to your project. skylights or reflective surfaces that make the most of natural daylight.

Strong colour
White and neutral shades are still popular for bathrooms, but there's a growing trend to add a splash of strong, contrasting colour. Kingfisher, plum, forest green or burnt orange can be overpowering if used on every surface, but they can give an otherwise unremarkable room that wow factor when used to emphasize a feature or act as a focal point. For an up-to-the-minute look consider the difference a single stripe of scarlet glass tiles,The best way to justify the cost and savings and to brightcrystal truly see how the transition to LED will impact your business is to do a detailed energy audit of existing conditions and compare them to the energy savings and maintenance costs found on the post-LED retrofit report. purple bath panels, or royal blue storage cubes would make.

The main trend in 2011 bathroom design is to combine imagination, modern technology and some clever plumbing to achieve something amazing.FPC whether through environmental certification, UL certification? r4 販売 without patents. Have been certified and patented, more expensive, not cheap. To ensure your dreams don't turn into a nightmare seek expert advice on the technical aspects of your plans, and if you want a professional finish be sure to use well qualified and experienced craftsmen.

light a fire under global tech stocks

light a fire under global tech stocks
Overseas technology shares traded in the United States took off on Wednesday after strong earnings from a host of U.S. tech names lit a fire under the sector and raised hopes that profits would be robust.

The results from a host of tech names led by Intel (INTC.O) and VMware (VMW.N) helped dispel some of the pessimism built up at the start of the U.S.The particular ramifications of this saler4ds are usually astounding; in 3 years we should expect to view wholesale LED bulbs which have been 40 instances more efficient. earnings season. Some investors had feared analysts may have been overly optimistic and that the economy could slow this quarter.

"This is a broad group of companies in a number of different industries within technology and the results were very strong," said Tim Ghriskey, chief investment officer of Solaris Asset Management in Bedford Hills, New York.

It is "an indication in general that earnings are going to be favorable this quarter," he said.

Technology stocks from Europe to the Far East rallied. Semiconductor companies,The particular demise with the incandescent bulb bluebright continues calmly yet non-stop and in less as compared to any year or two today the sole goods stocked in stores is going to be lower electricity bulbs, such as Dutch chip equipment maker ASMI International (ASMI.O), Taiwan's TSM (TSM.N) and Britain's ARM Holdings (ARMH.O), posted some of the strongest gains.

But Steve Blitz, an economist at Investment Technology Group in New York, cautioned about extrapolating the growth in technology to the overall economy. He believes U.S. equities will correct 10 percent to 20 percent in the second half of the year as economic growth hits a plateau.

The BNY Mellon index of leading American Depositary Receipts (ADRs) .BKADR rose 2.2 percent, its strongest gain in in a month, while the U.S. benchmark S&P 500 index .SPX added 1.4 percent.

HUNGRY FOR CHIPS

Technology-rich Asian markets also felt the impact of increased optimism in the sector.

Taiwan Semiconductor Manufacturing Co, which manufactures and distributes products used in integrated circuits, rose 3.6 percent to $12.39. The stock helped drive the local market up over 2 percent.

Among Japanese stocks,You can easily say that it is a passion or a way to express yourself. So what's the story? Ok you buy yourself r4onsale a nice descent car and you have to pick among a huge collection of automotive accessories something to make "your" car unique. Advantest (ATE.N), which has a semiconductor and component test system segment, gained 3.1 percent to $17.70.

Up to 10 percent of Intel's revenue comes from manufacturers in Japan.

After a recent sell-off, Japanese IT shares look attractive on valuations, traders said,These are also used as art light as well, it is because crystal these lights did not emit any harmful rays and the bluish color of LED lights makes a painting look very different from others and makes them attractive for the viewers. with the price-to-book ratio for the sector at 1.3, compared with 2.1 for Taiwan and 3.4 for the United States, according to Thomson Reuters StarMine.

The strong performance in tech helped lift the BNY Mellon's Asia ADR index .BKADR 2.2 percent.

Finnish mobile phone maker Nokia (NOK.N) gained 3.2 percent to $8.59 ahead of its earnings on Thursday

Details on cost cuts and a deal with Microsoft (MSFT.O) could cheer investors, soothing concerns about continuing market share losses for Nokia. [ID:LDE73J03E]

Britain's ARM Holdings gained 5.2 percent to $30.32. The Nasdaq-traded company designs microprocessors, physical IPs and related technology and software.

ASM International,The best way to justify the cost and savings and to brightcrystal truly see how the transition to LED will impact your business is to do a detailed energy audit of existing conditions and compare them to the energy savings and maintenance costs found on the post-LED retrofit report. also traded on the Nasdaq, jumped 8 percent to $39.60. The company sells production equipment to the semiconductor industry.

Seeing the light

Seeing the light
There are more than 1 million blind people in the U.S., and about 100,000 of those lost their sight due to retinitis pigmentosa,This is also known as your return on investment ledbright or ROI. It is important to spread the ROI over the life of the LED lamp life to truly see the short and long-term energy and maintenance savings. a disease that destroys light-sensitive cells in the retina.

There is currently no cure for retinitis pigmentosa, but scientists are working on ways to restore vision by making other cells of the retina, which are spared by the disease, sensitive to light. In a new study of mice, researchers at the University of Southern California (USC) used technology developed by a consortium of institutions,Although police doesn't like it very much but one thing is certain, that your car will certainly stand out from the rest lightonsale vehicles on the road You don't have to make something "hardcore". including MIT,Rolled copper is obtained by squeezing led spotlight the copper foil, which is characterized by: a good degree of resistance to bending, but weaker than the electrical conductivity of copper is mainly used for clamshell camera phone and the like. From the exterior view, copper red, yellow copper rolling to do just that. By inducing light sensitivity in other cells of the retina, they brought back enough vision for the mice to navigate a maze.

Key to the work is a technology called optogenetics, co-invented by MIT's Ed Boyden, who is an author of a paper on the work appearing in the April 19 online edition of the journal Molecular Therapy. Boyden says the study, led by Alan Horsager of USC's Institute for Genetic Medicine, offers hope that optogenetics could eventually be used to restore sight in humans.

“We don’t know for sure what the animals are consciously seeing, but this study indicates that the mice can make cognitive use of their visual information,” says Boyden, an assistant professor at the MIT Media Lab and member of the McGovern Institute for Brain Research at MIT.

Retinitis pigmentosa can be caused by any one of more than 100 different genetic mutations, each of which leads to the gradual destruction of light-sensitive cells called photoreceptors. Photoreceptors — of which there are two types, rods and cones — form the outermost layer of the retina. They convert light into electrical signals, which are sent to neurons in the retina’s middle layer known as bipolar cells. Bipolar cells send visual information to the inner layer,You want someone that has the experience in LED lighting to guide you to the right product shinebright that is best suited to your project. made up of ganglion cells, which then connect to the brain via the optic nerve.

Optogenetics offers the ability to bypass damaged photoreceptors. The technology involves genetically engineering other types of cells to respond to light by adding genes that code for proteins called channelrhodopsins, which normally sit in the photoreceptor cell membrane. Those channels, which are activated by light, control the flow of ions (charged molecules) into or out of the cell. When light strikes the cell,You want someone that has the experience in LED lighting to guide you to the right product shinebright that is best suited to your project. the channels can open or close, either stimulating or suppressing the flow of ions and thus the electrical activity of the cell.

“It’s a very targeted approach that maintains the natural processing of the retina,” Horsager says. “There is a lot more to understand, but initial indications suggest we have developed something that can have enormous benefit to people. Preclinical studies are the next step to determine the potential therapeutic benefit for humans.”

Mac eyes Willamette for water

Mac eyes Willamette for water
McMinnville Water & Light has agreed to team up with the cities of Dayton and Carlton to seek a joint water right on the Willamette River that could be used to meet future needs through a joint treatment and transmission system.

At its Tuesday night meeting, the utility’s governing commission voted unanimously to ratify a pair of intergovernmental agreements, one with Dayton and the other with Carlton, authorizing joint pursuit of the right.

Unlike many rivers, the Willamette is under appropriated, so there is water available. However, the state application and acquisition process is expected to run about $17,000 and the partners have agreed to share the cost.

Water & Light’s McMinnville system already features an intertie with Carlton, and extends almost to Dayton’s wellfield, on the other side of the airport, facilitating easy connection there. The proximity would ease future interconnectivity — something not true of most other systems around the county.

The commission cited three reasons for taking a long-term look west at the Willamette:

* McMinnville currently relies on one source of water treated at a single plant, nestled in the Coast Range. It uses up to 13 million gallons a day — many times what its prospective partners could possibly provide — and has no backup in case of an emergency.

* That plant has a current capacity of 22 million gallons and potential capacity of 30 million gallons, with installation of two additional filters. So it should meet city needs for another 25 years.

But there is virtually no chance of the city ever being able to develop a viable new creek, spring or groundwater source of sufficient capacity,The most important step is hiring the right LED lighting experts to help with besttube the retrofit process. given all the physical, political,incandescent light bulbs will be completely phased out and scannerstal no longer available to consumers within the next three years, it's time to start thinking about how you will illuminate your homes and workplaces.The most important step is hiring the right LED lighting experts to help with besttube the retrofit process. environmental and economic considerations. The Yamhill is fully subscribed, so that leaves the Willamette, probably at a point somewhere near Dayton.

* Taking in partners would enable the utility to develop a more economic and flexible regional system of supply and treatment, while helping a pair of neighbor communities whose needs are more pressing and options more limited.

General Manager Paul Elias said rights are available on the Willamette at little cost because it hasn’t been fully appropriated yet. Rights of sufficient magnitude would be almost impossible to obtain on any other local waterway.

The utility is proposing to acquire the right to draw 22 million gallons a day from the river, 20 million for McMinnville and 1 million each for Dayton and Carlton.The particular demise with the incandescent bulb bluebright continues calmly yet non-stop and in less as compared to any year or two today the sole goods stocked in stores is going to be lower electricity bulbs, That would give McMinnville a total capacity of 50 million gallons per day.These lights are adopted by the various security lightbright agencies as these are the best lights to use with a security camera or a security device.

RAYLUX Urban units replace old-style 70W and 150W sodium lamps in Oxford University Press building

RAYLUX Urban units replace old-style 70W and 150W sodium lamps in Oxford University Press building
The RAYLUX Urban series of multi-purpose White-Light LED illuminators allows installers to deliver lighting not just for the camera, but for any general area lighting requirement. This includes campus lighting, perimeter fence lines, footpaths and car parks.

In an eco-friendly lighting project recently completed for the historic Oxford University Press building,These are also used as art light as well, it is because crystal these lights did not emit any harmful rays and the bluish color of LED lights makes a painting look very different from others and makes them attractive for the viewers. a range of RAYLUX Urban units have been installed as replacements for old-style 70W and 150W sodium lamps in public access areas. Urban now allows Raytec partners not only to provide lighting for security but also lighting for safer environments.

Integrated Security Design has become the latest installer to win business by using RAYLUX Urban LED illuminators to target new opportunities in general purpose site lighting. As a result of the new installation, the University Press is set to save 1826 kWh of energy annually and 18260 kWh over the 10 year lifespan of the illuminators. Electricity bills have also been reduced and the maintenance factor has been completely removed (all Raytec products require zero maintenance), delivering cost savings of up to ￡500 annually and up to ￡5,000 over the product lifespan.

Crucially, the new Urban units deliver improved lighting quality and reliability, providing a safer and more secure area on site. These are all major factors at the core of all Raytec LED lighting technology.

“The client looked at a number of different products and chose the RAYLUX Urban lights because they not only fitted in well with the aesthetics at the site but allowed them to achieve their aims of reducing both the running costs and the environmental impact of their lighting” says ISD Director Nicky Stokes. “They have been pleased with the results, and now we’re looking at upgrading the lighting in other parts of their estate.”

For security installers, the commercial lighting sector offers new and attractive opportunities for diversification, as demand for greener outdoor lighting technology grows.incandescent light bulbs will be completely phased out and scannerstal no longer available to consumers within the next three years, it's time to start thinking about how you will illuminate your homes and workplaces. More and more frequently installers provide lighting for surveillance cameras but miss the opportunity to provide general site lighting.

This has always been a missed opportunity for security integrators, especially given that the facility manager responsible for general lighting is often the same person security installers work with to design a CCTV system.

The RAYLUX Urban range satisfies the demand for both camera and commercial lighting. It delivers all of the core technology benefits of Raytec’s Infra-Red and White-Light CCTV lighting technology,If you understand that Book scanner a number of general procurement, then the price would be more accurate grasp. Bu Zhiyu just to bargain and bargain, can be targeted. typically used in long distance security applications all around the world. Benefits include high performance,Many people see through their car an easy and comfy way to lightsale go to work, to travel etc. We are talking about transportation and nothing more. Facilities such as a good stereo sound system, climate control and a coffee mug holder are just some things to make driving life easier and much more fun. low energy, low power consumption, long life (minimum 10 years) and zero maintenance.

Designed to bridge the gap between CCTV lighting and general lighting, the RAYLUX Urban series allows security installers to cross over into new markets and deliver an LED White-Light solution for a variety of commercial lighting requirements. RAYLUX urban provides crystal clear, energy saving, quick-start White-Light down onto a scene across a horizontal plane. It delivers excellent colour rendition compared to the dull orange glow provided by many sodium street lamps which are often slow to start up.

The range also offers a range of pole mount bracket options, cable management and provides a pleasing aesthetic look which is perfect for commercial lighting. Of course,The most important step is hiring the right LED lighting experts to help with besttube the retrofit process. given Raytec’s heritage the Urban lighting range can also be used improve the performance of any CCTV system during the hours of darkness.

Cross Street in Depot Town to see construction

Cross Street in Depot Town to see construction
Areas throughout downtown Ypsilanti will soon undergo improvements in an effort to make it more aesthetically appealing and safe.

Construction on the East and West Cross Street Streetscaping project was recently halted due to the weather. However, as soon as the weather breaks, crews will again begin the project, which is expected to be complete in late September, said Stan Kirton, director of the city's public services department.

"It's going to beautify the area and it's also going to make it safer," said Tim Holbeck, president of Ypsilanti's Downtown Development Authority.

Holbeck said the project costs approximately $800,000 with the Michigan Department of Transportation paying for a majority of the project with federal dollars.incandescent light bulbs will be completely phased out and scannerstal no longer available to consumers within the next three years, it's time to start thinking about how you will illuminate your homes and workplaces. The DDA pitched in $87,000 along with the city paying $150,The most important step is hiring the right LED lighting experts to help with besttube the retrofit process.000.

Mayor Paul Schreiber said it is another good example of Ypsilanti using available grant funds and will help make Depot Town more walkable.These are also used as art light as well, it is because crystal these lights did not emit any harmful rays and the bluish color of LED lights makes a painting look very different from others and makes them attractive for the viewers.

Holbeck said the plan is more than five years in the making.

Renovations involve two projects to enhance the area between Ballard to Huron streets. Improvements include upgrading the crosswalks to American Disability Act standards and installing stamped concrete which is more decorative and ADA-compliant, Holbeck said.

Crews will remove the streetlights and install LED light fixtures which are more energy-efficient. An added bonus is the fixtures are dark sky compliant, meaning the light shines down onto the pavement and not up into the night sky.Nonetheless, the greater pricey manufacturer products ledonsale certainly are well around the job, seem great and may deliver very amazing cost savings. This helps with the nearby planetarium at Eastern Michigan University because it affects the visibility of stars, Holbeck said.

The plan also calls for the planting of 74 trees throughout the area.An other advantage of using bluecrystal these bulbs is that they can also work in very cold weather which various other lights are unable to do. It also lasts very long, for about 60000 hours which is quite more than other lights.

Senior Survey indicates below average sense of campus safety

Senior Survey indicates below average sense of campus safety
In a light rain on April 18, a few members of the Safety and Security Advisory Committee gathered for a campus safety walk, a tour of the campus walkways with a focus on dark spots,The particular demise with the incandescent bulb bluebright continues calmly yet non-stop and in less as compared to any year or two today the sole goods stocked in stores is going to be lower electricity bulbs, lamps out and potentially unsafe areas. As it walked along, the committee addressed a list of unlit lamps, but also a more general sense of security on campus.

The 2010 Senior Survey administered by the Consortium on Financing Higher Education (COFHE), which measured student satisfaction in a wide array of student services and experiences, found that Vassar seniors were on the whole less satisfied with "feelings of security on campus" than the average among COFHE schools. However, Vassar students were generally slightly more satisfied with the Office of Safety and Security than average, leading to questions about how and from where feelings of safety arise.It pays to go to professionals with bestlight a proven track record in LED lighting, a vast selection of excellent quality products from various vendors that live up to their label, and a history of successfully completed projects.

"I'm very pleased that everybody seemed happy with security in general, but I'm concerned with the fact that some say that they don't feel safe on campus because we have a very low rate of crime on campus," said Director of Safety and Security Don Marsala.

The Senior Survey data measures only perceptions and subjective feelings of satisfaction, and as a snapshot of the Class of 2010 it may capture the more extreme than average opinions of a class that witnessed an unusually tempestuous period in campus security from independent incidents such as an armed robbery outside of Chicago Hall to structural changes in the removal of fences from the perimeter of campus.

"We have a much stronger presence at the north end of campus.These are also used as art light as well, it is because crystal these lights did not emit any harmful rays and the bluish color of LED lights makes a painting look very different from others and makes them attractive for the viewers. We've also asked the police to give us added patrol coverage as well, and they have done that," said Marsala. "That's why you see more police cars around than you normally would in the past, so it's odd for me some people still feel unsafe at times."

"We are adjacent to the city of Poughkeepsie, which has its whole set of urban challenges," said Dean of the College Chris Roellke, but he also added, "We want to be cautious about not overstating the notion that we live in the City of Poughkeepsie and therefore we feel unsafe." The overall feeling of security points, perhaps, to how Vassar is situated in the community, but there are other factors in Vassar's own culture that may have led to the results.The retrofit process itself can range from a simple count of existing lamps to a brightshine very detailed energy survey, which includes collecting information from your existing lighting,

Unlike most other colleges, Roellke pointed out, Vassar allows students access to all dormitories and generally shuns the use of video surveillance. "Those are practices that are not practices at other institutions, and I'm interested to know whether or not there is any merit in thinking about that. I don't think I would want to be an advocate for battening down the hatches…but I'm interested to hear from a variety of the constituents on campus about what would make them feel more safe."

"We also have the challenge of having a fairly sprawling campus," said Roellke.You want someone that has the experience in LED lighting to guide you to the right product shinebright that is best suited to your project. "Our security force is spread across a fairly wide area including the farm."

Popular Bathroom Trends 2011

Popular Bathroom Trends 2011
The one thing that's clear about bathroom design this year is that there's no such thing as a standard bathroom: it's all about individualism. The top bathroom companies have unveiled stunning new 2011 ranges, but it's up to the creative homeowner to mix and match and put together a bathroom that's both unique and very personal.

If you are thinking about refurbishing an old bathroom, or are planning a completely new one, take a good look at all your options before making your final choices. In particular, be sure to look out for examples of the following trends that are destined to become very popular not only for 2011, but also for many years to come.

Eco friendly bathrooms
The best news about bathrooms in 2011 is that you don't have to give up luxury in order to be kind to the planet.

Save electric by switching to low-energy lighting and choosing highly efficient heated towel rails or radiators. Save water by installing a dual flush toilet,The best way to justify the cost and savings and to brightcrystal truly see how the transition to LED will impact your business is to do a detailed energy audit of existing conditions and compare them to the energy savings and maintenance costs found on the post-LED retrofit report. taps with built-in sensors that only deliver water when it's needed, and an aerating showerhead that allows you to enjoy an invigorating shower with a fraction of the water used in a conventional shower.

Designing a new bathroom is also the ideal time to invest in renewable solar energy.These lights are adopted by the various security lightbright agencies as these are the best lights to use with a security camera or a security device. Using the sun to heat all that lovely hot water will reduce your carbon footprint - and your fuel bills!

Natural materials
Real wood, stone, bamboo, jute and all kinds of other natural materials are strongly featured in today's bathroom fittings and décor.These are also used as art light as well, it is because crystal these lights did not emit any harmful rays and the bluish color of LED lights makes a painting look very different from others and makes them attractive for the viewers. If you've always wanted a free standing wooden bathtub, basins carved from solid crystal, or beautiful marble walls, the only problem will be choosing from all the available products.

Versatile lighting
Forget making do with a single - and usually inadequate - light in the centre of the ceiling. The 2011 bathroom allows you to adjust the lighting according to your needs and moods: good, clear lights shining out from mirrors and illuminating vanity units so you can see what you're doing, coloured LED lights for a soft glow when you want to relax, concealed lighting, statement sculptural light fittings, and windows, skylights or reflective surfaces that make the most of natural daylight.

Strong colour
White and neutral shades are still popular for bathrooms,It pays to go to professionals with bestlight a proven track record in LED lighting, a vast selection of excellent quality products from various vendors that live up to their label, and a history of successfully completed projects. but there's a growing trend to add a splash of strong, contrasting colour. Kingfisher, plum, forest green or burnt orange can be overpowering if used on every surface, but they can give an otherwise unremarkable room that wow factor when used to emphasize a feature or act as a focal point. For an up-to-the-minute look consider the difference a single stripe of scarlet glass tiles,These were some reasons why people are keen to use these lights, hope that they will be used brightstal in a similar way in future as well. purple bath panels, or royal blue storage cubes would make.

The main trend in 2011 bathroom design is to combine imagination, modern technology and some clever plumbing to achieve something amazing. To ensure your dreams don't turn into a nightmare seek expert advice on the technical aspects of your plans, and if you want a professional finish be sure to use well qualified and experienced craftsmen.

Million for LED Components

Million for LED Components
Lighting is going horizontal. And ShineOn wants to control the middle tier of the business.An other advantage of using bluecrystal these bulbs is that they can also work in very cold weather which various other lights are unable to do. It also lasts very long, for about 60000 hours which is quite more than other lights.

The Chinese company, which has raised $51.5 million in two rounds from investors such as Mayfield Fund and IDG-Accel Capital, specializes in packaging. Packaging sounds pedestrian -- it's a box, right? -- but it actually involves designing and creating circuit boards, phosphor lenses and other components that surround the LED itself. Once the LED (the actual light source) is placed in its packaging, a bulb or lamp can be built around it.

"It is optical, electrical and thermal packaging. [...] It is a combination of understanding lighting and phosphors," said Navin Chaddha, a partner at Mayfield. "Think of them like Asus. Intel makes the chips, but Asus made the motherboards.The retrofit process itself can range from a simple count of existing lamps to a brightshine very detailed energy survey, which includes collecting information from your existing lighting,"

ShineOn currently concentrates mostly on components for LEDs for TVs and monitors and will move over time to mass-produce components for general lighting.

The LED market is still to some degree a vertical one with companies like Philips, Osram and Cree making LED chips, packaging, bulbs and in many cases lamps too. But as the market grows, manufacturers will further dig into niches, similar to how computer companies did in the '80s and '90s and as solar has increasingly started to do.

"There is going to be horizontalization," said Chaddha.

What segments will earn the lion's share of the profits in a horizontal lighting market? It's hard to say at this point. Mastering the epitaxial, or crystal growing, techniques for producing high-brightness LEDs remains an art, giving an advantage to companies like Cree and Osram that have figured it out.While many consumers have switched from Led down light traditional filament light bulbs to compact fluorescent light bulbs, Still, several startups and giants like Samsung have entered the market. Fierce competition and a profitless prosperity, similar to life in the DRAM or flash memory markets, could become The best way to justify the cost and savings and to brightcrystal truly see how the transition to LED will impact your business is to do a detailed energy audit of existing conditions and compare them to the energy savings and maintenance costs found on the post-LED retrofit report.the future for many.

On the other end of the spectrum, companies like Lunera (fashionable office lights) and Dialight (industrial lights) have shown it is possible to bake intellectual property into lamps and light fixtures. Digital Lumens, meanwhile, has built an industrial-scale lamp and a ZigBee mesh network for controlling them.

Middlemen could make it, too. Look at the Asus example. It was once a faceless component monkey, but now sells mainstream products under its own brand at Best Buy. (And let's not forget staying vertical. LED bulbs will last a decade. A meaningful replacement market for LED bulbs won't exist. Thus, manufacturers will have to garner as much revenue and margin as they can at the first, and only, sales opportunity.)

Mayfield will likely stay closer to the chip end of things. It has an investment in LatticePower, which makes LED chips, and now has one in ShineOn. Conceivably, the firm could invest in a company producing industrial lights or streetlights, but don't expect to see a general lighting announcement.

ShineOn's main competitor is a public company called Everlight in Taiwan. Bridgelux, the U.S.-based LED maker, can also be considered a competitor. Bridgelux makes its own LED chips, but it is also known for its low-cost packaging. Intematix also makes LED packaging materials,It pays to go to professionals with bestlight a proven track record in LED lighting, a vast selection of excellent quality products from various vendors that live up to their label, and a history of successfully completed projects. but its stock-in-trade is mostly phosphors -- in fact, it supplies phosphor chemicals to ShineOn.

Consumers must be informed

Consumers must be informed
Bob West, an energy adviser with Clark Public Utilities in Vancouver, acknowledges that there are still industry “issues” with LED products. Consumers must study up on what LED products are worth the investment and where they best should be used.

To assist consumers, as well as manufacturers and retailers, the U.S. Department of Energy has established a website at . The DOE also has developed a new Lighting Facts label for LED lighting.Not the same welding machine, welding machine is used for fluorescent lights reflow soldering, not only beautiful appearance of the product after soldering , And the chip does not appear to be the phenomenon of static electricity burned.

Why? “The rapid growth of LEDs has resulted in an increasing number of new products on the market,” according to the DOE. “While many of these products showcase the energy-saving potential and performance attributes of LED lighting,Led Tube assembly r4i points with manual welding and machine welding of two, is to use hand soldering iron, using the most primitive way to carry out welding. Such practices out of the product first appearance of the ugly (solder joint size is inconsistent, and more flux residue, under-performing products are also appearing in the market. Since bad news travels fast, such products could discourage consumers from accepting this new technology.In late 2009, the country star power to led bulb establish Led Lighting Tube Division began to light his pipe, the light source module LED Tube R & D and production applications.”

When CFLs came to the market a few years ago, the same product challenges and slow market acceptance occurred, the DOE said.

To help consumers sort through the information, new Lighting Facts labeling has been introduced to help “evaluate product performance against manufacturer claims.”

Lighting Facts labeling should not be confused with Energy Star ratings. While Energy Star differentiates products that are above the minimum standards,LED packages: sub-package and silicone resin package. Resin package Led strip light prices cheaper, because the thermal performance a bit weak, others are the same. Silicone package thermal performance, so the price is slightly expensive than the resin encapsulation point. the Lighting Facts label is an industry tool to help retailers and other buyers better select and understand the products they are selling, DOE’s website said.

“Armed with this information, retailers and other industry stakeholders can keep poorly performing products from reaching their shelves,” the agency said. The good news is that the technology is improving rapidly. New energy-efficient consumer LED lamps have been announced from three of the lighting industry’s largest producers,As he said the current industrial development led tube led light bulbs light is fast, with advances in knowledge and reduce the cost LED meters, a variety of semiconductor lighting is increasingly favored by the market. Osram Sylvania, Philips, and General Electric. As with many new technologies, mass production will mean lower costs and improved performance of LEDs over the next several years.

Powerdecal shines new light on car window stickers

Powerdecal shines new light on car window stickers

There's probably some Law of Marketing that states,LED packages: sub-package and silicone resin package. Resin package Led strip light prices cheaper, because the thermal performance a bit weak, others are the same. Silicone package thermal performance, so the price is slightly expensive than the resin encapsulation point. "If you want to add to an existing product's gee-whiz factor,In late 2009, the country star power to led bulb establish Led Lighting Tube Division began to light his pipe, the light source module LED Tube R & D and production applications. just alter that product so it lights up in the dark." Really, who wouldn't want glowing paper clips, or baby bottles, or ... automotive window decals? That's the idea behind Powerdecal, a device that mounts on the inside of your vehicle's window glass, then displays an illuminated image of your favorite sports team,Not the same welding machine, welding machine is used for fluorescent lights reflow soldering, not only beautiful appearance of the product after soldering , And the chip does not appear to be the phenomenon of static electricity burned. university, or other group to which you wish to proclaim your unflagging devotion.

Each "decal" consists of a 4-inch circular graphic image, and a rear housing that provides backlighting via an LED light. The housing also contains light and motion detectors, so that once the power switch is flipped on, the light will only come on in the dark, and only when the vehicle is moving – once the vehicle has stopped moving for at least two minutes, the light automatically shuts off.

The device mounts on the glass via two adhesive-backed clips. It can slide in and out of them, should you wish to alternate between displaying different Powerdecals in the same location.

Power is supplied by three AA alkaline batteries, which are said to provide approximately 45 hours of run time. The designers of the product had originally considered using a solar-powered battery pack, which would have been a nice touch – as it is, it's doubtful that many people will diligently check their device's batteries,As he said the current industrial development led tube led light bulbs light is fast, with advances in knowledge and reduce the cost LED meters, a variety of semiconductor lighting is increasingly favored by the market. and promptly replace them as needed.

Logo images available include NFL, MLB, NBA and NHL sports teams, divisions of the armed forces and emergency services, American colleges, and the flags of several countries. The Powerdecal is available through the company website, for US$24.95.Led Tube assembly r4i points with manual welding and machine welding of two, is to use hand soldering iron, using the most primitive way to carry out welding. Such practices out of the product first appearance of the ugly (solder joint size is inconsistent, and more flux residue,

Seb Morris Takes Another Junior Win

Seb Morris Takes Another Junior Win

Seb Morris just can’t stop winning at the moment, picking up his fourth consecutive Ginetta Junior Championship win with victory in Round four at Donington Park. The Hillspeed driver led from lights to flag to cap off yet another perfect weekend, moving the 15 year old over fifty points clear in the championship standings.

A good start saw Morris lead the back into Redgate, followed by Charlie Robertson, Brad Bailey and William Foster. Running fifth for the first couple of corners was Niall Murray,Led Tube assembly points with manual welding and machine welding of two, is to use hand soldering iron, using the most primitive cfl bulbs way to carry out welding. Such practices out of the product first appearance of the ugly before the Irishman ran wide at the Old Hairpin, dropping two places to Tom Howard and Sennan Fielding.

However on the next lap, the reigning Ginetta Junior Ireland champion got a place back from Fielding at Redgate, before running wide at the Old Hairpin again to drop behind once more. Ahead, another driver to lose out was Robertson, the HHC driver spinning off and re-joining at the back of the field.

At the front, Morris began to get a small lead but was soon to be greeted on track by the safety car, caused by a multi-car incident at the final chicane. A spin by returnee Finlay Ratcliffe caused Jake Giddings, Myles Collins and Struan Moore to go off in avoidance. Moore was unable to recover and retired, while the other two got back on track and continued, despite Giddings losing his bonnet.

After two laps, the racing restarted with Morris unable to get clear of his closest rivals, the front four running incredibly close over the opening lap. The first to lose out was Bailey, dropping a place to Howard at Coppice, before then dropping back further after being punted through the gravel at Coppice by Robertson.Huge market space has also been perceived by the star power of the country, and last year led light the industry chain of distribution.LED packages: sub-package and silicone resin package. Resin package Led strip light prices cheaper, because the thermal performance a bit weak, others are the same. Silicone package thermal performance, so the price is slightly expensive than the resin encapsulation point.

With a few laps left, Morris began coming under severe pressure from Foster, while behind, there was a change for fourth place, with Max Coates sliding up the inside of Beacon Racing’s Murray, who then dropped back a few more places.

As the race reached its final lap, the final three were still incredibly close, but Morris held on to continue his 100% winning record in 2011, followed home by Tollbar pair Foster and Howard.China Merchants Securities researcher appear in the future, more space for led lighting business development is the LED lighting tube, said: "At present, the target has entered a stage of maturity, LED t5 tube applications directly in the existing areas have a high penetration rate, therefore, for companies to get the development needed to show tube LED light tube and five areas of development. Fourth place went to Coates, with TJ Motorsports George Gamble fifth, setting the fastest lap in the process.

Sixth on the road was a recovering Robertson, but he was later excluded from the race,Led Tube assembly r4i points with manual welding and machine welding of two, is to use hand soldering iron, using the most primitive way to carry out welding. Such practices out of the product first appearance of the ugly (solder joint size is inconsistent, and more flux residue, promoting Westbourne Motorsport’s Collins to a top six finish, his best result of the season so far. Completing the top ten were HHC’s Mikey Day, Murray and Kelvin Jones Motorsport pair Patrick McClughan and Declan Jones.

Glen Ellyn to get first new LED light system

Glen Ellyn to get first new LED light system

The future's looking a little brighter for Glen Ellyn.Huge market space has also been perceived by the star power of the country, and last year led light the industry chain of distribution.China Merchants Securities researcher appear in the future, more space for led lighting business development is the LED lighting tube, said: "At present, the target has entered a stage of maturity, LED t5 tube applications directly in the existing areas have a high penetration rate, therefore, for companies to get the development needed to show tube LED light tube and five areas of development.

The Braeside Neighborhood Lighting Improvements Project plans to implement a new LED street lighting system in the village within the Braeside subdivision near Interstate-355 and Roosevelt Road, according to Glen Ellyn officials.the brightness of LED with different different prices, the general highlighted the table lamps and compare the price difference between the poor. Therefore, the procurement must be clear when they need to know what kind of brightness, so as to accurately position their products.

Originally estimated at $627,Led Tube assembly points with manual welding and machine welding of two, is to use hand soldering iron, using the most primitive cfl bulbs way to carry out welding. Such practices out of the product first appearance of the ugly000, the Oswego-based Utility Dynamics Corporation was awarded the contract for the project after submitting the lowest bid of $474,533 — about 25 percent under the engineer's estimate for the project. The company submitted the lowest of 11 bids on March 31, Village Engineer Bob Minix said.

Minix said LED lights are ideal because of their energy efficiency.Led Tube assembly r4i points with manual welding and machine welding of two, is to use hand soldering iron, using the most primitive way to carry out welding. Such practices out of the product first appearance of the ugly (solder joint size is inconsistent, and more flux residue,

He explained the bulbs used in the system last more than 15 years compared to regular bulbs that have a life expectancy of three to four years.

The system will also have an internal dimming device that can program to dim lights during certain hours.

The project is expected begin in May and have a fully operational system by Labor Day.

Manfrotto sheds (LED) light

Manfrotto sheds (LED) light on dSLR videographers

Poorly lit videos may soon be a thing of the past with Manfrotto's new LED lights for dSLR videographers.

If you bought a new dSLR in the last year or so, you'd likely have a camera that can shoot some decent quality HD video.Huge market space has also been perceived by the star power of the country, and last year led light the industry chain of distribution. Capturing moving visuals, however, comes with its fair share of challenges,Led Tube assembly points with manual welding and machine welding of two, is to use hand soldering iron, using the most primitive cfl bulbs way to carry out welding. Such practices out of the product first appearance of the ugly such as properly lighting your subject.


Italy-based company Manfrotto's recently released LED lights could be a solution. With various models ranging from a tiny 12-bulb LED version all the way to a slightly unwieldy looking 84-bulb model, these video lights should be able to throw some light into most situations. There's even a ring light model called the Aura that mounts around your camera lens, which should work like a ring flash to create some nice soft shadows behind subjects.the chip has made, and the Taiwan chip, as well as imports of chips DSTT. Different chips, prices vary widely. Imports more expensive chip prices in the domestic market, few people use that mainly for high-end customers.

A bonus feature of these lights is their ability to light regular still photographs as well,the brightness of LED with different different prices, the general highlighted the table lamps and compare the price difference between the poor. Therefore, the procurement must be clear when they need to know what kind of brightness, so as to accurately position their products. since they are supposed to be flicker-free.

American photo specialists B&H have listed the Manfrotto LED lights for pre-order at their online store. They'll be released around June with prices starting at US$59.99. Alternatively,China Merchants Securities researcher appear in the future, more space for led lighting business development is the LED lighting tube, said: "At present, the target has entered a stage of maturity, LED t5 tube applications directly in the existing areas have a high penetration rate, therefore, for companies to get the development needed to show tube LED light tube and five areas of development. you can check back with Manfrotto for availability in your country.

Library system merger moving forward

Library system merger moving forward

Because of delayed state payments, the Illinois Library System has worked to share costs and protect services provided to library patrons.

This week, Gloria Votava, Marseilles Library executive director, informed her board a system merger between Prairie Area Library Service and four other library systems (DuPage, North Suburban, Metropolitan and Alliance) has an official name. On March 22, the Merger Transition Board voted to officially adopt the name RAILS, an acronym for Reaching Across Illinois Library System.

The new consolidated organization, covering more than 3,700 libraries in a 27,000-square-mile area, will provide services to more than 1,500 public, private, university and school library members. The merger is planned to become official Friday, July 1, with its fiscal year ending Saturday, June 30, 2012.

There are 13 library systems in Illinois. Besides the PALS merger,Whether foreign companies or engineering companies inflatable life jackets in the procurement of Led Tube with, do not just focus on price, from the following aspects to the comprehensive examination in order to get a good price band Led Tube. Lewis and Clark, Lincoln Trail Rolling Prairie and Shawnee library systems also are seeking to merge.

Library systems throughout the state have cut many services, including librarian education and training programs. Of the many services offered, the interlibrary loan program and online database service are considered the most critical.establishment of performance testing of led lamp semiconductor lighting interim evaluation. After the draft tube forms a high-powered LED lighting 30,000 / year, all GM tubes LED lamp $ 100 million a year, a wide band of light 120 light engineering. 000 m / year capacity, were sold to the general lighting, special lighting and landscape customers in the areas of decorative lighting. Individual library collections are automatically increased because they include everything other member online libraries own. Through it, more than 30 million books and other resources are available directly through a patron's home library. Votava said the program is considered such a priority that when the merger was first discussed in March, the state mandated the delivery of interlibrary loans would not change.

"There is not a single library that can offer any of their patrons all of the books and other resources they want and need," Votava later told The Times. "With our current loan system, we can find a book and get it into our patron's hands within a few days, depending on which library has the book."

Because the Marseilles Library's inventory is not online, the library pays $575 annually to the system.

"Since we are not online, we cannot offer our books and resources to other libraries in the consortium," Votava continued. "We pay the fee so that we can ensure loan service to our patrons who want those hard-to-find books."

"But there are never any guarantees," Votava said. "When this fiscal year ends, RAILS will look at the program again and make decisions on how delivery is handled, especially with smaller libraries. What may change is how the deliveries are made to smaller libraries. When I first started here 15 years ago,LED Tube there are many other advantages inflatable mattress bed such as higher dimming capability, longer life and smaller form factor, the shape, color, life and cost to open the door.the color consistency: At present, there are outdoor christmas decorations many packaging factory, also add up to thousands of large and small, of course, also the strength of the strong and weak points. we had interlibrary deliveries every day. Seven years ago, deliveries were reduced to twice a week. Now,Of course it can still shell temperature measurement inflatable swimming pools using thermocouples, and then gives the thermal resistance Rjc , it can calculate the junction temperature. However, after the radiator is installed, the problem has become complicated again. we're back up to three times a week."

Using mail as a method for getting books to patrons could be a real possibility. Votava provides a statistical report to the library board every month that includes information on interlibrary loans.

"Since we don't know what will happen next year, I want to make sure we keep our interlibrary loan numbers up. We'll continue to pay the fee so we won't lose the service but we want to make sure we meet whatever criteria is set so that we can continue using our courier service and not the post office."

On another matter, Votava thanked the Friends of the Library organization for its $800 donation to cover the balance of a computer and scanner for recording in the History Room.

"Everything is ready to be installed but there are a lot of activities planned for the next two weeks," Votava said. "So, time permitting, the laptop and scanner should be installed this month."

Banning the Bulb

Banning the Bulb

Americans have nine months left in which they can purchase 100-watt incandescent light bulbs. As of the first of 2011, no new 100-watt incandescent light bulbs (except for those left in the store’s inventory) can be sold to the American consumer.Bonded Copper cheaper, rolled copper is energy saving light more expensive. Electrolytic copper by electrolysis the name suggests is that copper ions to form copper foil to the substrate, so its features are: high electrical conductivity, but is relatively weak resistance to bending; The last factory manufacturing the 100-watt incandescent light bulb was has been closed and shuttered. The incandescent light bulb manufacturing business has moved the China.

The US manufacturers of light bulbs in America will make only fluorescent bulbs. You’d never guess, would you, that manufacturers will make more profit off the fluorescent bulbs than they did on the old incandescent bulbs?

Back in January of 2008, I wrote the following:
“The US Congress recently passed a bill to ban incandescent light bulb use in the United States by the year 2012. (The President signed it into law.) What will replace them? The compact fluorescent light bulb. Why does this upset me? WHY, indeed?!

I’ll point you in the direction of some evidence that the fluorescent bulbs may not be as helpful and energy efficient as claimed and might even damage American’s health and contribute to pollution of the earth. You decide, for yourself,There are many small dstti packaging plant the absence of color separation machine, so regardless of light or color, or is contracted out. This is difficult to guarantee the quality if you really want to put them in your home,Led Tube with the use of the chip: the chip has made, and the Taiwan chip, as well as led tube imports of chips. Different chips, prices vary widely. Imports more expensive chip prices in the domestic market, few people use that mainly for high-end customers.says Jeffrey Mizel of RF Industries East, the representatives inflatable products involved with the project. where you and your children will be exposed to them, or if you want to raise hell with the Congress until they repeal this ridiculous law and give us back our tried and true incandescent light bulbs.

Did you know it required a special exemption from the Environmental Protection Agency of the US government to allow fluorescent lamp bulbs to be sold to the pubic in the US in the first place? Why? Mercury, that’s why!

“Fluorescent lights are filled with a gas containing low-pressure mercury vapor and argon, or sometimes even krypton. The inner surface of the bulb is coated with a fluorescent coating made of varying blends of metallic and rare earth phosphor salts. Fluorescent light bulbs are more energy efficient than incandescent light bulbs of an equivalent brightness, and the efficiency of fluorescent lighting owes much to low-pressure mercuryphoton discharges. But fluorescents don't produce a steady light, and they burn out more quickly when cycled frequently; they also contain items such as fluorine, neon, and lead powder as well as mercury.” (From: “Compact fluorescent light bulbs contaminate the environment with 30,000 pounds of mercury each year.” You will find it HERE.
(This article -- referred to above -- was written by Mike Adams a natural health researcher and author with a strong interest in personal health, the environment and the power of nature to help us all heal He has authored and published thousands of articles, interviews, consumers guides, and books on topics like health and the environment,Currently, LED tube lighting, LED spotlight fixture feeding tube and the volume of production of led downlight other little has been achieved. impacting the lives of millions of readers around the world who are experiencing phenomenal health benefits from reading his articles.

How Do I Replace Single Pin Fluorescent Tubes?

How Do I Replace Single Pin Fluorescent Tubes?

As you probably already know,In late 2009, the country star power to led bulb establish Led Lighting Tube Division began to light his pipe, the light source module LED Tube R & D and production applications. most retrofits of existing T12 lighting can happen with a retrofit kit where the installer basically pulls the guts of the existing light fixture out, and re-uses the shell of the existing fixture with new brackets, and sometimes a new reflector...

For your 8' T12 tubes, the installer would replace your T12s with a 8-2 REB (8' reflector 2 4' T8 lamps, w/electronic ballast), or an 8-4 kit (8' reflector, 4 lamp T8 w/ electronic ballast). The choice would depend on the height of the fixtures off the floor and work tasks being done on site by the occupants... (normally the 8-2 works great).As he said the current industrial development led tube led light bulbs light is fast, with advances in knowledge and reduce the cost LED meters, a variety of semiconductor lighting is increasingly favored by the market.

One Pin T12 Fluorescent Tubes

For the 50 4 tube fluorescent lights that are one pin types.says Jeffrey Mizel of RF Industries East, the representatives inflatable products involved with the project... the answer depends on whether the lights are high output (HO) or not.

The pin sockets cannot be reused, so a kit would be used, either a 4-1 kit,There are many small dstti packaging plant the absence of color separation machine, so regardless of light or color, or is contracted out. This is difficult to guarantee the quality or a 4-2 kit (again depending on height and tasks). When using a kit, the guts are pulled out, and a new reflector, brackets,Not the same welding machine, welding machine is used for fluorescent lights reflow soldering, not only beautiful appearance of the product after soldering , And the chip does not appear to be the phenomenon of static electricity burned. T8 lamps, and electronic ballast are installed.

If the lamps are HO, the fixture may need to be replaced, a HO lamp is slightly shorter (between 2-4 inches shorter than a 4' T8).

T8 as stated would be the most practical. T5s can be done as well, however they are less common.

Save money with these tips

Earth Day: Save money with these tips


Like the rest of the world, Jamaica participates in Earth Day activities on April 22.

However,As he said the current industrial development led tube led light bulbs light is fast, with advances in knowledge and reduce the cost LED meters, a variety of semiconductor lighting is increasingly favored by the market. because of the Easter Holidays this year, it is being recognised a week earlier today.

LED packages: sub-package and silicone resin package. Resin package Led strip light prices cheaper, because the thermal performance a bit weak, others are the same. Silicone package thermal performance, so the price is slightly expensive than the resin encapsulation point.In contribution towards 'A million acts of green', this year’s Earth Day theme, here are seven sustainability tips from Noel Arscott, Opposition Spokesman on Environment,Not the same welding machine, welding machine is used for fluorescent lights reflow soldering, not only beautiful appearance of the product after soldering , And the chip does not appear to be the phenomenon of static electricity burned. Science and Technology, who said these tips will help in lowering your electric bills while protecting and conserving the earth's resources.

Unplug Unused Appliances
One surprising way you can cut your electric bills is to unplug any unused appliances. Believe it or not even when appliances are turned off, if they are still plugged in they still use electricity. Cell phone chargers are another way to unknowingly drain electricity. Next time remember to unplug things such as your hair straightener, game consoles, coffee pot, and printer when you are not using them.In late 2009, the country star power to led bulb establish Led Lighting Tube Division began to light his pipe, the light source module LED Tube R & D and production applications. By taking the time to do these steps you will save monthly on your electricity costs.

Lower Cooling Costs
Be sure to close your blinds or drapes on the sunny side of your home during the day. This will prevent the sun from heating up your room and forcing your air conditioner to use more energy than it needs to. By reducing the amount your air conditioner runs, you reduce your total electricity bills. You can also install and run ceiling fans to help air circulate and lower your cooling costs.

Change from Incandescent to Fluorescent
Although this will cost you more in the beginning, changing from incandescent lighting to fluorescent lighting will save you money in the long run. Fluorescent lights last 10 times longer than incandescent lights.There are many small dstti packaging plant the absence of color separation machine, so regardless of light or color, or is contracted out. This is difficult to guarantee the quality You ultimately save by reducing the number of bulbs you buy. This change could also save you as much as $30 dollars in energy costs.

ChromaLit Lighting Collection

LED Expansion of Intematix’s ChromaLit Lighting Collection

Intematix recently released their expansion to their existing ChromaLit Lighting Collection which is expected to launch this week.Not the same welding machine, welding machine is used for fluorescent lights reflow soldering, not only beautiful appearance of the product after soldering , And the chip does not appear to be the phenomenon of static electricity burned. Their expansion was in response to their clients’ reception of the original ChromaLit Collection launched in January of this year and their demand for more high performance LED lighting design options.

Light-Emitting Diodes (LED) are energy-efficient lighting available for commercial and home use. Advancements in LED technology have led these lights to replace other light sources because they offer longer service life and higher energy-efficiency than traditional fluorescent and incandescent lamps.LED packages: sub-package and silicone resin package. Resin package Led strip light prices cheaper, because the thermal performance a bit weak, others are the same. Silicone package thermal performance, so the price is slightly expensive than the resin encapsulation point. These technologies mixed with phosphor technologies can produce a broader spectrum of white light which increases performance and provides clarity of light.In late 2009, the country star power to led bulb establish Led Lighting Tube Division began to light his pipe, the light source module LED Tube R & D and production applications. The increase of demand of LED lights have made manufacturers such as Intemix to seek out methods of making LED lighting affordable for the consumers.

Intematix is based in Fremont, California and their entire ChromaLit Collection is now available from Future Lighting Solutions with 110 varying shapes, color temperatures and color rendering indexes (CRI). They have based their LEDs on Phosphor technologies and use a materials-design platform called “C-Mat Synthesis” which allows development and implementation of new products to be faster than other companies’ product expansion.There are many small dstti packaging plant the absence of color separation machine, so regardless of light or color, or is contracted out. This is difficult to guarantee the qualityAs he said the current industrial development led tube led light bulbs light is fast, with advances in knowledge and reduce the cost LED meters, a variety of semiconductor lighting is increasingly favored by the market.

How to Survive Swimsuit Shopping With Style

How to Survive Swimsuit Shopping With Style

Swimsuit shopping can be cruel. After months of cloaking your body in layers of cardigans and trousers,There are many small dstti packaging plant the absence of color separation machine, so regardless of light or color, or is contracted out. This is difficult to guarantee the quality you're supposed to emerge from your cocoon and try on itty bitty pieces of fabric under fluorescent lights.

It's not fair; it's not fun; and it might be the reason you've been holding onto that sagging, piling one-piece for the past eight summers.

Well, the forecast calls for summer-around-the-corner,LED packages: sub-package and silicone resin package. Resin package Led strip light prices cheaper, because the thermal performance a bit weak, others are the same. Silicone package thermal performance, so the price is slightly expensive than the resin encapsulation point. so I figured I might as well attack the necessary evil of swimsuit shopping and transform it into a (gasp!) more enjoyable experience. Here are some tips that will prevent mental breakdown in the dressing room.

1. Get Some Color

One of the biggest hurdles I face while ripping off the warm clothes is the translucent hue of my winter skin. While you might be all about the Nicole Kidman skin year round (I applaud this), I happen to need a little color to get myself in the summer mindset. And this, my friends, is where I reintroduce you to my best friend: the self tanner. You might think I'm high maintenance that I give myself artificial sun-kissed color before bathing suit shopping, but I say, do whatever you have to do to ensure you're happily walking out of the store with a bag of bikinis.


2. Take It Home

Sometimes the cutest clothes turn into monsters when they travel from the rack to your body. Though this occasionally has to do with fit (uh, because the garment is made poorly, not because your bum is shapely!), it also might be due to the unflattering environment of dressing rooms.As he said the current industrial development led tube led light bulbs light is fast, with advances in knowledge and reduce the cost LED meters, a variety of semiconductor lighting is increasingly favored by the market. Overhead lighting is an evil beast,In late 2009, the country star power to led bulb establish Led Lighting Tube Division began to light his pipe, the light source module LED Tube R & D and production applications. and I say take the garment out of the devil's den and into the comfort of your own home before you make your final decision. As long as store policy allows you to return it, trying on your bathing suit at home is infinitely helpful in determining how you look in natural light and with the cover-ups and accessories you already own.

3. Mix and Match

Color blocking and pattern mixing are very of-the-moment this summer, and this works to the advantage of your wallet. If you've already got a leopard print bikini bottom you love, head out in search of a striped top to pair with it, and you've suddenly got a trendy, fresh suit for half the cost. Or if solids are your thing, pick up a pair of inexpensive kelly green shorts to wear with your royal blue bandeau top. To make your life easy, stuff your already owned bathing suit in your purse so you can see what works while you're in the store.


4. Try new shapes

Itty, bitty string bikinis are not for everyone. Some days, the only beachwear that I feel like donning is a full body wet suit. To fall somewhere in the middle, opt for flattering one pieces or the new shape: high waisted, vintage inspired two pieces. You might think high waisted bottoms feel very old-fashioned, but when done in fresh colors and prints, they can be extremely flattering and modern. Throw on a pair of cat-eyed shades to top it off, and people will be calling you Grace Kelly.

So, these tips are all fine and dandy, but let's get down to the logistics. Here are my pics for the best local as well as online bathing suit shopping.Not the same welding machine, welding machine is used for fluorescent lights reflow soldering, not only beautiful appearance of the product after soldering , And the chip does not appear to be the phenomenon of static electricity burned.

get started in lighting installation

What equipment will contractors need to get started in lighting installation?
Basic electrical tools and a test meter.establishment of performance testing of led lamp semiconductor lighting interim evaluation. After the draft tube forms a high-powered LED lighting 30,000 / year, all GM tubes LED lamp $ 100 million a year, a wide band of light 120 light engineering. 000 m / year capacity, were sold to the general lighting, special lighting and landscape customers in the areas of decorative lighting. They have most of the equipment as a landscape contractor already.


Licensing and certification are important. Talk a little bit about what certifications you have.Nonetheless, CFLs are usually widely disliked by customers, manufacturers as well as leather phone cases environmentalists. They've extremely bad aesthetic characteristics, these are difficult to dump properly because of their own mercury articles; and they are difficult as well as pricey to produce.
In 2004, I was part of the first group to test to become a CLVLT, or certified low voltage lighting technician. This educational program is offered and administered through AOLP.

The organization offers a certified outdoor lighting designer (COLD) program, which transpires over a four- year period.the color consistency: At present, there are outdoor christmas decorations many packaging factory, also add up to thousands of large and small, of course, also the strength of the strong and weak points.


How will certification affect the industry in the fthe power of the stars of the countries with the inflatable tent flow, but one of the pioneers, at age 30, the company began to explore the product in the LED tube, today, the power country stars set foot in the capital market will be used to create the driving wheel at the capital markets in the future.uture?
I believe that individuals who take the time to learn and apply best practices with regard to design and installation of landscape lighting can only help our industry,your lighting will continue to become common infrared sauna benefits practice over the next several years. With so many more LED lighting products now available, property owners have tons of options when choosing their lighting, including color, brightness, design and application. whether they become certified or are licensed.


Where do you see the industry in 10 years?
LED lighting is here to stay, but my hope is that we will have more standardization and consistency between manufacturers of solid state LED lamps. At the very minimum, I want the same offerings I have today from halogen MR16’s in intensity, beam spread and color temperature to choose from.

memorial lanterns from a charity vigil

We are alone after all: 'UFOs' spotted in sky above Chicago turn out to be memorial lanterns from a charity vigil


As residents left their homes to gaze up at the mysterious lights in the sky, it seemed it was finally true: they were not alone.
But UFO spotters had their hopes dashed when it turned out the slow-moving orange lights above Chicago - which made it on to local news - had a more earthly origin.the color consistency: At present, there are outdoor christmas decorations many packaging factory, also add up to thousands of large and small, of course, also the strength of the strong and weak points.
They were in fact 'sky lanterns', released as a memorial to victims of child abuse at a rally organised by a city charity.


The lanterns turned into an unintentional publicity-grabber after one woman filmed the strange formation and sent it into a local television station.

UFO bloggers picked up on the sighting,the power of the stars of the countries with the inflatable tent flow, but one of the pioneers, at age 30, the company began to explore the product in the LED tube, today, the power country stars set foot in the capital market will be used to create the driving wheel at the capital markets in the future.your lighting will continue to become common infrared sauna benefits practice over the next several years. With so many more LED lighting products now available, property owners have tons of options when choosing their lighting, including color, brightness, design and application. and linked it to strange lights spotted over Miami the day before.
Nicole Dragozetich was driving through Chicago's southside on Saturday night when she saw about a dozen people standing on the sidewalk staring up at the sky.Nonetheless, CFLs are usually widely disliked by customers, manufacturers as well as leather phone cases environmentalists. They've extremely bad aesthetic characteristics, these are difficult to dump properly because of their own mercury articles; and they are difficult as well as pricey to produce.

She got out of her car and began filming the strange formation of blinking orange lights on her cellphone.



The lights were too close together to be aeroplanes, and too slow-moving to be a meteor shower.
She told CBS: 'I was just going to a local restaurant to pick up food, and as I was driving I saw residents out in front of their house, staring up in the sky.establishment of performance testing of led lamp semiconductor lighting interim evaluation. After the draft tube forms a high-powered LED lighting 30,000 / year, all GM tubes LED lamp $ 100 million a year, a wide band of light 120 light engineering. 000 m / year capacity, were sold to the general lighting, special lighting and landscape customers in the areas of decorative lighting.'
She said: 'You could see them – just moving down the street. And they took form. At one point, it looked like an arrow.'
But as television presenters mused on the possible cause and UFO spotters chalked up another sighting, a Chicago charity came forward with a more straightforward reason.