Consumers must be informed
Bob West, an energy adviser with Clark Public Utilities in Vancouver, acknowledges that there are still industry “issues” with LED products. Consumers must study up on what LED products are worth the investment and where they best should be used.
To assist consumers, as well as manufacturers and retailers, the U.S. Department of Energy has established a website at . The DOE also has developed a new Lighting Facts label for LED lighting.Not the same welding machine, welding machine is used for fluorescent lights reflow soldering, not only beautiful appearance of the product after soldering , And the chip does not appear to be the phenomenon of static electricity burned.
Why? “The rapid growth of LEDs has resulted in an increasing number of new products on the market,” according to the DOE. “While many of these products showcase the energy-saving potential and performance attributes of LED lighting,Led Tube assembly r4i points with manual welding and machine welding of two, is to use hand soldering iron, using the most primitive way to carry out welding. Such practices out of the product first appearance of the ugly (solder joint size is inconsistent, and more flux residue, under-performing products are also appearing in the market. Since bad news travels fast, such products could discourage consumers from accepting this new technology.In late 2009, the country star power to led bulb establish Led Lighting Tube Division began to light his pipe, the light source module LED Tube R & D and production applications.”
When CFLs came to the market a few years ago, the same product challenges and slow market acceptance occurred, the DOE said.
To help consumers sort through the information, new Lighting Facts labeling has been introduced to help “evaluate product performance against manufacturer claims.”
Lighting Facts labeling should not be confused with Energy Star ratings. While Energy Star differentiates products that are above the minimum standards,LED packages: sub-package and silicone resin package. Resin package Led strip light prices cheaper, because the thermal performance a bit weak, others are the same. Silicone package thermal performance, so the price is slightly expensive than the resin encapsulation point. the Lighting Facts label is an industry tool to help retailers and other buyers better select and understand the products they are selling, DOE’s website said.
“Armed with this information, retailers and other industry stakeholders can keep poorly performing products from reaching their shelves,” the agency said. The good news is that the technology is improving rapidly. New energy-efficient consumer LED lamps have been announced from three of the lighting industry’s largest producers,As he said the current industrial development led tube led light bulbs light is fast, with advances in knowledge and reduce the cost LED meters, a variety of semiconductor lighting is increasingly favored by the market. Osram Sylvania, Philips, and General Electric. As with many new technologies, mass production will mean lower costs and improved performance of LEDs over the next several years.
Bob West, an energy adviser with Clark Public Utilities in Vancouver, acknowledges that there are still industry “issues” with LED products. Consumers must study up on what LED products are worth the investment and where they best should be used.
To assist consumers, as well as manufacturers and retailers, the U.S. Department of Energy has established a website at . The DOE also has developed a new Lighting Facts label for LED lighting.Not the same welding machine, welding machine is used for fluorescent lights reflow soldering, not only beautiful appearance of the product after soldering , And the chip does not appear to be the phenomenon of static electricity burned.
Why? “The rapid growth of LEDs has resulted in an increasing number of new products on the market,” according to the DOE. “While many of these products showcase the energy-saving potential and performance attributes of LED lighting,Led Tube assembly r4i points with manual welding and machine welding of two, is to use hand soldering iron, using the most primitive way to carry out welding. Such practices out of the product first appearance of the ugly (solder joint size is inconsistent, and more flux residue, under-performing products are also appearing in the market. Since bad news travels fast, such products could discourage consumers from accepting this new technology.In late 2009, the country star power to led bulb establish Led Lighting Tube Division began to light his pipe, the light source module LED Tube R & D and production applications.”
When CFLs came to the market a few years ago, the same product challenges and slow market acceptance occurred, the DOE said.
To help consumers sort through the information, new Lighting Facts labeling has been introduced to help “evaluate product performance against manufacturer claims.”
Lighting Facts labeling should not be confused with Energy Star ratings. While Energy Star differentiates products that are above the minimum standards,LED packages: sub-package and silicone resin package. Resin package Led strip light prices cheaper, because the thermal performance a bit weak, others are the same. Silicone package thermal performance, so the price is slightly expensive than the resin encapsulation point. the Lighting Facts label is an industry tool to help retailers and other buyers better select and understand the products they are selling, DOE’s website said.
“Armed with this information, retailers and other industry stakeholders can keep poorly performing products from reaching their shelves,” the agency said. The good news is that the technology is improving rapidly. New energy-efficient consumer LED lamps have been announced from three of the lighting industry’s largest producers,As he said the current industrial development led tube led light bulbs light is fast, with advances in knowledge and reduce the cost LED meters, a variety of semiconductor lighting is increasingly favored by the market. Osram Sylvania, Philips, and General Electric. As with many new technologies, mass production will mean lower costs and improved performance of LEDs over the next several years.
沒有留言:
張貼留言